How to Put a Blade in a Jigsaw?
Jigsaws are one of the most versatile tools you can have in your toolkit. They can be used for a variety of tasks, from cutting through tough materials like metal to making intricate cuts in wood. But before you can start using your jigsaw, you need to know how to put a blade in it.
Here’s a quick guide on how to do just that.
- Read the jigsaw’s manual before attempting to put a blade in the saw
- Each model is different and you want to make sure you know how to properly insert the blade
- Unplug the jigsaw from its power source
- You don’t want the blade spinning while you’re trying to insert it
- Locate the housing for the blade on the body of the jigsaw
- This is typically located at either the top or bottom of the saw
- Insert the end of the blade into the housing, making sure that it is facing in the correct direction according to your manual
- Some models will have arrows printed on them to indicate which way the blades should be inserted
How to Change a Jigsaw Blade | Jigsaw Blade Installation
How Do You Change the Blade on a Jigsaw?
Assuming you are referring to a handheld jigsaw, the blades are usually changed by loosening a screw or thumb lever on the side of the blade holder, which allows you to remove and insert the new blade. Some models may have a quick-change feature that doesn’t require any tools. Always consult your jigsaw’s owners manual for specific instructions on changing the blade.
Which Way Does Jigsaw Blade Go?
When it comes to jigsaw blades, there is a right way and a wrong way to install them. If you’re unsure which way the blade goes, simply look at the teeth on the blade. The teeth should be pointing downwards when the blade is inserted into the jigsaw.
If they’re pointing upwards, then you’ve got it installed backwards!
How Do You Put a Blade in a Black And Decker Jigsaw?
Assuming you are referring to a Black and Decker jigsaw with a blade guard:
To put the blade in the jigsaw, first make sure the switch is in the “off” position. Next, open the blade guard by depressing the clamp release lever and swinging the guard open.
Insert the blade into the blade holder, making sure that the teeth of the blade are pointing downwards. Close the blade guard until it locks into place.
How Do You Put a Blade in a Makita Jigsaw?
Assuming you are referring to a standard, corded Makita jigsaw:
To install the blade, first make sure that the power is off and the plug is removed from the outlet. Next, open up the shoe cover by depressing the latch and swinging it open.
With the cover open, you should be able to see the blade holder. To release the old blade, simply press down on the locking mechanism and pull out the blade. Now take your new blade and insert it into the holder so that teeth are pointing downwards.
Make sure that you hear it click into place before continuing. You can now close up the shoe cover and prepare to use your jigsaw!
Credit: startwoodworkingnow.com
How to Put a Blade in a Black And Decker Jigsaw
Most Black & Decker jigsaws have a keyless blade clamp that allows for quick and easy blade changes. To change the blade on your jigsaw, follow these simple steps:
1. Unplug the jigsaw from the power source.
2. Remove the old blade by loosening the clamp screw with a Phillips head screwdriver.
3. Insert the new blade into the chuck and tighten the clamp screw until it is snug. Be careful not to overtighten the screw, as this can damage the chuck.
4. Plug in the jigsaw and test it out on a scrap piece of wood before cutting your project piece.
Conclusion
If you’re looking to put a blade in your jigsaw, there are a few things you need to know. First, make sure you have the right type of blade for your saw. There are many different types of blades available, so consult your saw’s manual to find the right one.
Second, pay attention to the orientation of the teeth on the blade. The teeth should be pointing down when you insert the blade into the saw. Finally, use caution when inserting the blade into the saw.
Be sure to line up the holes on the blade with those on the saw before tightening it in place.